Re: M sector gear -- what's up with this?

Posted by Bob M on March 15, 2005 at 14:19:42 from (151.190.254.106):

In Reply to: Re: M sector gear -- what's up with this? posted by billOH on March 15, 2005 at 13:31:44:

Bill - Before you stick the sector gear in, check for radial (horizontal) play at the top end of the pivot shaft. If you find ANY play at all, you should replace the upper pivot shaft bushing under the sector gear to take up the clearance. Otherwise even with a good worm and sector gear set installed, the front end is still liable to still wobble at speed.

Follow Ups:

• Re: M sector gear -- what's up with this? Andy Martin 14:45:43 03/15/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]