Re: Removing Oil Pump

Posted by Jay (ND) on March 02, 2005 at 07:09:04 from (66.231.121.66):

In Reply to: Removing Oil Pump posted by SuperCmore on March 02, 2005 at 07:03:06:

If it's the same as a C, there will be 2 bolts on the outside of the block holding it in. Under the bolts is a metal tab keeper that you need to bend back. I had to wiggle my pump a bit to get it out, but it will drop straight down. While you are straightening that plate, I would also replace the pressure relief spring. It's right there after you remove the plate.

Follow Ups:

• Re: Removing Oil Pump TDK 07:18:24 03/02/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]