Re: M water pump pulley

Posted by the tractor vet on February 28, 2005 at 06:12:35 from (4.124.70.102):

In Reply to: M water pump pulley posted by Dick Davis on February 28, 2005 at 04:08:08:

Wire brush the thread clean more panther pee a long small tipped drift punch and tap you could cut the old belt off and add a littel heat to the nut but not much if the old belt was out of the way you will be able to get to both sides of the threads with the panther pee and it may move one way just a bit and work it back and forth , and yes they will break been there done that.

Follow Ups:

• Re: M water pump pulley Dick Davis 14:30:53 02/28/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]