Re: One-bottom plow an A

Posted by El Toro on February 27, 2005 at 19:05:43 from (152.163.101.13):

In Reply to: One-bottom plow an A posted by JR in TX on February 27, 2005 at 17:23:07:

I had to look at a photograph of a Farmall A that I restored that had a moldboard plow that came with it and the plow was installed when the picture was taken.

1. One vertical short bracket attaches near the underside center of tractor.
2. A longer bracket attaches under the steering
shaft near the right front of tractor.
3. Another bracket looks as if it attaches to the under side of engine near the bottom of radiator.

I had never installed this plow before and the brackets seem to reach to where they belong.

The other end of these brackets are attached near the center of the plow beam under the tractor. This plow does a good job plowing. Hal
of the

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]