Re: 4cyl. international engine

Posted by CNKS on February 08, 2005 at 11:21:00 from (204.249.178.138):

In Reply to: 4cyl. international engine posted by Joe T. on February 08, 2005 at 10:45:34:

A picture would help. An H or M will have plates on both sides of the block, the one on the right exposes the pushrod area, the one on the left is a water jacket cover. I believe this is true of the W9 also. I don't think the A,B,C, engine has any such covers. There should be a machined surface under the #1 spark plug that has a number -- the prefix to that number will be an indication. Also, there should be a part number cast into the block, that should still be there. If the block is off an F series, someone else will have to guess. The IH engines referred to have the dist or mag on the right, carb on the left.

Follow Ups:

• Re: 4cyl. international engine Joe T. 13:42:59 02/08/05 (1)
  • Re: 4cyl. international engine Jim Becker 20:44:20 02/08/05 (0)

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]