Re: H- Governor

Posted by Bob M on January 21, 2005 at 07:50:55 from (151.190.254.106):

In Reply to: H- Governor posted by MTK on January 21, 2005 at 06:32:17:

Good advice below. However if you live where temperatures are constantly below freezing, problem could also be condensation has frozen in the governor or linkage tube and is causing the carb throttle shaft to stick.

If adjusting the carburetor and fixing any vacuum leaks does not cure it, remove the governor and bellcrank covers. Carefully clean out any sludge, ice, etc inside. Then make sure the governor to carb bellcrank and throttle shaft move freely without any binding.

Follow Ups:

Post a Followup Name: E-Mail: Hide: Yes No Hiding your address protects you from spam generators but allows you to receive email response notifications. Subject: 65534p> Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]