Re: hit and miss engine

Posted by KevinH on January 11, 2005 at 16:04:23 from (64.139.245.186):

In Reply to: hit and miss engine posted by dexter on January 11, 2005 at 13:08:37:

I own several La and Lb engines. If I remember correctly, the mag drives off of the cam. So the direction of rotation on the mag is the same as the flywheel. Turn the engine over slowly with the plug wire off until the impulse snaps(this removes tension from the impulse spring). Then take the mag out being careful not to let the gear turn. Turn the gear one tooth in the opposite of the way the flywheel turns, reinstall and check. There are two marks on the flywheel:EX and DC. The DC mark should be straight up when the impulse snaps. You can email me if you have any questions.kharbin (at) nctv.com ..replace the (at) with @ Good luck Kevin

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]