Re: 1 Pnt Fast Hitch Q's

Posted by Bill in NC on December 06, 2004 at 20:47:59 from (24.163.24.255):

In Reply to: 1 Pnt Fast Hitch Q's posted by Stan(VA). on December 06, 2004 at 19:39:38:

Stan, with the single point fast hitch, the single point hitch is
attached to a u-shaped drawbar
linkage. This u-shaped drawbar linkage is located
directly under the seat and can be coupled to either a stationary
socket underneath the floorboard area or to
the front lift hydraulic rocker arm via a coupling rod. By
coupling to the front lift rocker arm, the rear mounted
implement can be brought closer to
the ground by raising the front lift and conversely the rear
implement can be lifted higher by dropping the front lift. I've
not used my 140 for turning plow work (yet), but on the farm
growing up remember coupling the drawbar linkage to the
underseat socket when plowing with a turning plow.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]