Re: Dummy Needs Advice Again

Posted by Larry in CO on November 03, 2004 at 19:22:46 from (32.97.110.142):

In Reply to: Dummy Needs Advice Again posted by Allan in NE on November 03, 2004 at 18:20:00:

Allan,

No need to take the cover off the tranny. To get to the seal, remove the slotted drive by unscrewing it using a bar that will fit in the slot or, do it the way I did, take a pipe wrench to it. Make sure the tractor is in gear and braks locked to accomplish this. Once that drive is out of the way, remove the three bolts holding the seal holder in place. Drive the old seal out, put the new one in and replace the holder, making sure that the word "TOP" is at the top. Screw the slotted dog back un and you"re good to go. HTH. Larry

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]