Re: H frontend needs ajustment

Posted by Farmall Ed on October 10, 2004 at 16:46:54 from (65.54.98.107):

In Reply to: H frontend needs ajustment posted by JRB IN MAINE on October 10, 2004 at 16:18:13:

JRB, There is a bearing in front of the worm gear that sometimes goes bad and will cause a lot of shake,it is behind the big nut on the front of the oil reservoir. This bearing is usually available a IH dealers or a good bearing supply house. Also some H's have a round gear on top that can be taken off and rotated half way around and to get it out of the worn area. If it has a cut gear and it is worn badly you may want to replace it.Check the rims if the are warped bad they can add to your problem.Sorry for the long answer but have been there a couple of times. Hope this helps. ED

Follow Ups:

• Re: H frontend needs ajustment JRB IN MAINE 16:57:17 10/10/04 (1)
  • Re: H frontend needs ajustment Bob M 08:21:46 10/11/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]