Fitting a loader to 484 - how difficult to remove

Posted by Clanger on October 04, 2004 at 14:24:47 from (80.176.149.33):

I'm just about to buy a loader for my 484 which is advertised not too far away. It was last used on a 454 so I'm hoping that it should bolt straight on to my 484, although I do need to add another spool/hydraulic outlet to operate it.

I've never used a loader before (just use the tractor for mowing), but the price is right and I think it could come in handy for a number of little 'moving stuff around' jobs that keep cropping up.

My question is this, how difficult/labor intensive is it to fit/remove a loader? Seeing as it's probably only going to be used occassionally, is it viable to fit it for a couple of days work and then remove it for when it's not being used?

Follow Ups:

• Re: Fitting a loader to 484 - how difficult to rem JB2 19:18:27 10/04/04 (3)
  • Re: Fitting a loader to 484 - how difficult to rem Clanger 01:45:54 10/05/04 (2)
    • Re: Fitting a loader to 484 - how difficult to rem JB2 17:06:25 10/05/04 (1)
      • Re: Fitting a loader to 484 - how difficult to rem clanger 01:19:41 10/06/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]