Re: Timing Marks on Super C Farmall

Posted by CNKS on September 27, 2004 at 18:25:55 from (207.178.96.213):

In Reply to: Timing Marks on Super C Farmall posted by Scott Swanson on September 27, 2004 at 09:28:48:

The mark is on the flywheel. It is very small. To find mine I had to lay on my back and clean off the flywheel as I turned it with a screwdriver in the ring gear. The other mark is a raised mark on the cast piece behind the oil pan. There really is no difference in timing for a distributer or magneto, except the distributer does not trip. Timed with #1 on TDC with rotor pointing to #1 on the cap.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]