Re: lobe lift

Posted by riverbend on September 19, 2004 at 12:27:08 from (208.160.33.100):

In Reply to: lobe lift posted by Mike in CT on September 19, 2004 at 12:16:23:

The standard lift is 0.202". The Super H had 0.240". As long as the lobes are all the same, it will be okay. The 240 lift cam and domed pistons made quite a diffrence in my H.

Greg

Follow Ups:

• Re: lobe lift ChadS 07:05:21 09/20/04 (0)
• Re: lobe lift Mike in CT 15:23:20 09/19/04 (2)
  • Re: lobe lift riverbend 16:27:27 09/19/04 (1)
    • Re: lobe lift Dave S. 19:33:33 09/19/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]