Re: H clutch issue

Posted by Gene on August 22, 2004 at 14:55:02 from (208.144.172.158):

In Reply to: H clutch issue posted by ernz on August 22, 2004 at 08:19:04:

Could be an over greased pilot bearing - grease getting onto the clutch plate.

Next time you get the tractor unstuck. Try riding (slipping) the clutch a bit.

Search the archives. Someone suggested locking the clutch down and spraying the disc with hot soapy water from a small pressure sprayer. Then rinsing with clear water.

I use a clamp to lock down the clutch pedel on a Cub when not in use. I don't know if that is a good idea or not but it works until I have time to break the tractor and replace the clutch.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]