Re: IH 454 what are the pedals for

Posted by chad on July 30, 2004 at 17:40:16 from (63.156.28.49):

In Reply to: IH 454 what are the pedals for posted by joe blogs on July 29, 2004 at 18:55:22:

The lever that you see on the left hand side of the tractor when sitting on the seat is the transmission park lock. You pull it up to engage the brake and then an idiot light in the center of the dash will light up to tell you that it is on. To release it, there should be a little bar on the bottom of the lever that you pulled to engage it in the first place. The pedal on the right hand side when sitting on the tractor is for the auxilliary hydraulic outlets at the back of the tractor. It is likely that the tractor didn't originally have hydraulics, so the person made their own pedal to actuate a retrofit hydraulic system. We have a 2500 industrial (a industrialized 574), and that is how ours is. Hope it helps!

Follow Ups:

• Re: IH 454 what are the pedals for Don PA 17:37:42 08/03/04 (0)

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]