Re: Re: Re: IH 454 Clutch replacement

Posted by Ken C. on June 09, 2004 at 06:26:45 from (192.11.222.120):

In Reply to: Re: Re: IH 454 Clutch replacement posted by Ken C. on June 08, 2004 at 05:15:49:

Thanks JB, for the tip on supporting the front
end of the tractor during the split. With the
front-end weights, the center of gravity is very
close to the front-axle, and not at the jack
point.

Got the split done fairly easy.. Spent the most
time getting the temp.sensor removed. It didn't
work anyway, so I've ordered a new guage/assmbly.
The pressure plate fingers were shot, as was the
throwout bearing. Rattles worse than a pair of
those old ball-bearing skates we had as kids !!
New parts on the way (Bates Corp), and I should be back in
bidness. Cost of PP, clutch disk, TO and pilot
bearings was right at $300.. with a credit for
the core return of the PP and clutch disk of $60.
Happy tractor-ing !!!

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Re: IH 454 Clutch replacement Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]