Re: 300 head on H?

Posted by Wild Horses on May 27, 2004 at 10:28:31 from (216.51.163.251):

In Reply to: 300 head on H? posted by Chris Brown on May 26, 2004 at 08:37:59:

This is a common thing for pullers and such to do. I don't know what kind of HP increases you'll get, but I'd say 5 is a good guess. The finned manifold has better flow and the intake side stays cooler than the block manifold. I would suggest having the head shaved a little also. Do you have flat top or pop top pistons? An overbore piston kit or even going from flat-top to hig-comp. pistons will gain you more than a head change.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: 300 head on H? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]