Re: Carburetor float setting for Cub low-boy 154

Posted by Jeff on May 19, 2004 at 17:15:40 from (216.107.17.143):

In Reply to: Carburetor float setting for Cub low-boy 154 posted by Marte on May 18, 2004 at 19:05:05:

On the farm with 300-350 and450 carbs I would put the top half in the vice, upside down. Set the floats so they are level. The "top"of the float when it is running is now on the bottom. Make it square with the top half casting of the carb body.Bend the tab for the needle valve with a good pair of needle nose plyers. DON"T PUSH DOWN ON THE FLOATS TO ADJUST! You will bust up the seat. You need a real gentle touch to set them with a little hose and lift with your finger jazz. The books are correct if you have a good touch. This way was quick and easy and just about goof proof. Jeff

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Carburetor float setting for Cub low-boy 154 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]