Re: Re: Power upgrades for H

Posted by '52 Farmall H on April 26, 2004 at 11:21:48 from (64.24.19.48):

In Reply to: Re: Power upgrades for H posted by Zak on April 25, 2004 at 19:02:25:

"If you don't care about originality, take an angle grinder and remove the casting metal between the intake and exhaust runners of your manifold, making what amounts to an LP manifold."

Do you mean the intake and exhaust manifolds are one piece? If I remove the excess metal, is the idea to isolate the manifolds as much as possible to prevent air/fuel mix from being preheated? This should produce a denser mixture, right? Thanks.

Follow Ups:

• Re: Re: Re: Power upgrades for H Jonathan Mirgon 16:12:11 04/26/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Re: Re: Power upgrades for H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]