Re: Re: M 3pt setup?

Posted by CNKS on April 18, 2004 at 17:52:56 from (207.178.96.213):

In Reply to: Re: M 3pt setup? posted by Jerry on April 18, 2004 at 01:55:31:

Steel Wheel Ranch also sells Cross. I know very little about them, except that there was a post a while back that was not too complementary, at least for the one for a C. With the Saginaw for the H-450, you can bolt on the original drawbar, and use the swinging part that attaches under the rear end. The Cross has it's own drawbar, but you can't use the swinging part. Cross has one hyd cylinder, Saginaw has two, if that makes any difference.

Follow Ups:

Post a Followup Name: E-Mail: Subject: Re: Re: Re: M 3pt setup? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]