|
Farmall & IHC Tractors Discussion Board |
1086 and 1468
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by scott cupps on March 27, 2004 at 23:51:47 from (12.14.226.29):
I live on a family farm in southwest missouri and although my twin brother and I are only 18 years old we already own our fair share of ih's. We recnetly purchased 1468 with a dv 550 (awsome machine) and added a couple 5 inch chrome straight pipes. I was wondering if anyone out there in the wonderful world of red power has, or know of someone who has a M & W turbo kit manufactured for the 14 and 1568 models that they might be willing to sell. Also we have a 1086 that we will be attempting to pull this season and i could use all the helpful info i could get! The problem is I helped my buddy build a 966 (now a 1066 becausue we pulled the air reasearch to4 turbo off of a 1066, did a little compressor modification, and bolted it on. Its a hot little machine and now we are trying to build something that will beat it. Nothing like a little friendly competiton! The main problem is the 1086 doesn have a ta and i jsut dont know how she will perform in front of a sled even with the 11 mm head in the pump and turbo work. Like i said, i would greatly appreciate any info, no mattter how small the tip might be....and if anyone knows of a turbo kit for the 1468, and/or tips for pulling with the 1468 (despite the week bottom end of the dv 550) please let me know. Scott
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Fabricating Sidesheets - by Chris Pratt. The easiest and best first-time project for wanna-be sheet-metal workers like myself is flat or nearly flat metal cut and drilled to be a tractor's sidesheet. A sidesheet is sheetmetal to cover either the engine as in the case of early Oliver's, Massey-Harris' and many crawlers or the wiring and electrical components as in the case of the Massey-Harris Pony, Allis Chalmers' D Series (D-14, D-15, D-12, D-10, D-17, and D-19). The need for fabricating becomes obvious when you go to buy any of these
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
