Clutch adjustment on H--almost out

Posted by Jim Maine on March 19, 2004 at 08:24:46 from (24.31.142.123):

Thanks for the responses on the split--it is amazing how strong one bolt can be. Next question is about adjusting the clutch. I got this tractor from my father-in-law who had just put in a new clutch. There was almost no adjustment(6 inches of free play) left. The adjustment on the pressure plate is screwed all the way in. I have read that the linkage is the place for the adjustment anyhow. Is there more than one clutch for the H? This one is a 1948--SN 277139. There is no IH markings on the pressure plate. The disk has very little wear on it. There is a date of 8/11/1978 about the same time he put the clutch in. Thanks in advance for the advice.

Follow Ups:

• Re: Clutch adjustment on H--almost out riverbend 09:13:09 03/19/04 (4)
  • Re: Re: Clutch adjustment on H--almost out Jim Maine 13:56:26 03/19/04 (3)
    • Re: Re: Re: Clutch adjustment on H--almost out riverbend 17:10:01 03/19/04 (2)
      • Re: Re: Re: Re: Clutch adjustment on H--almost out Jim Maine 19:57:48 03/19/04 (1)
        • Re: Re: Re: Re: Re: Clutch adjustment on H--almost riverbend 06:21:36 03/20/04 (0)
• Re: Clutch adjustment on H--almost out Randy in NE 09:02:29 03/19/04 (0)

Post a Followup Name: E-Mail: Subject: Re: Clutch adjustment on H--almost out Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]