Re: How much for an M ??

Posted by John A on March 13, 2004 at 14:57:39 from (208.24.233.79):

In Reply to: How much for an M ?? posted by todd on March 13, 2004 at 14:33:28:

Todd, If The front end is good, and I mean damn good! Put Five hundred in $100 dollar bills in your shirt pocket. Another $125 in your jeans pocket. Go back an offer 500 cash, pull it out and fan the bills. See if he will bite on that! If not say you will split the difference with him. Cash Of coarse. He will bite then, only after he agrees to $625 do you pull out the remaining $125 dollars (Don't care on what denominations these bill are)
Do you really need the other parts off of this tractor, enough to justify the extra cost? Wide fronts can be had for an average price of about $500 or so.
Unless you cave too easyly, carry the remaining $125 also.
For me, this guy has to come some to me too for a deal to happen.
Hope this helps,
John A.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How much for an M ?? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]