Re: 544 Farmall Loader Hydraulics

Posted by bill on February 29, 2004 at 18:51:11 from (66.24.251.60):

In Reply to: 544 Farmall Loader Hydraulics posted by Stan Skowronek on February 29, 2004 at 15:18:17:

i run a 2250 loader on my 656 from 1 remote. go from the pressure side of your 544 remote (top outlet) to the "in" port on the prince valve, and go from the "out" port back to the bottom outlet on the 544. you'll have to lock the hyd handle back to make the prince valve work. downside is you have to unhook the loader to use remote on a pulled implement. i keep the engine speed to half throttle with the handle locked back to avoid too much pressure in loader valve circuit.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 544 Farmall Loader Hydraulics Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]