Re: H how far to slide in wheels

Posted by Farmer Bob on January 13, 2004 at 19:13:18 from (67.5.181.215):

In Reply to: H how far to slide in wheels posted by Bruce on January 13, 2004 at 18:12:30:

If you use the fender mounting extension plates offered you should be able to slide the wheels into what ever measurement you need for the trailer. I try to keep the inside of the wheel hub at least 1/2" away from the axle carrier end cap however.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H how far to slide in wheels Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]