Re: Ideal M farmstock puller

Posted by ChadS on January 13, 2004 at 19:06:10 from (66.228.96.227):

In Reply to: Ideal M farmstock puller posted by LRP on January 13, 2004 at 15:01:00:

A good friend of mine,, Ohio M puller, has a good recipe for a M engine. that consists of 4.25 bore, and 6 in or 6.25 stroke. Send him an email,, he may discuss this with you further. A 450 block is capable of 4.5 bore,, just pull out the sleeves, and bore it out. Also,, a 4-3/8 bore with a 7 inch stroke, using H rods, and Chrysler 400 pistons will make that kind of HP, easily. The smaller bore will be better,, more block the run on. There are so many cubic inch recipes to consider,, pick a cubic inch,, Would be happy to profile it for you, and help you with a parts list and machine, and clearence work to get it going!! Chad

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Ideal M farmstock puller Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]