Using an original 6V switch with 12V lights on a '

Posted by Dave in CT on December 21, 2003 at 22:45:29 from (64.252.220.51):

Continuing to get as much operational as possible, I'm wondering how to use the original 4-position switch with 12V lights. The wiring diagram posted by Robert Melville - Farmall H/M Stock 6V w. cutout - cryptically notes these positions as L-H-D-B (?,?, Dim?, Bright?). What do these positions switch on (or off)? The copy of the owner's manual I have lists functions of a three-position switch (Dim, Bright, Off). How can I use this switch to, for starters, switch on and off just a pair of single beam 12V lights? Can I use this switch to employ both the low and high beams of a pair of regular 12V headlights? I may just rig some lights I've lying around.

Thanks,

Dave

Follow Ups:

• Re: Using an original 6V switch with 12V lights on Bob M 04:51:25 12/22/03 (0)
• Re: Using an original 6V switch with 12V lights on Steve - IN 03:13:17 12/22/03 (0)
• Re: Using an original 6V switch with 12V lights on Hal 03:11:34 12/22/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Using an original 6V switch with 12V lights on a ' Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]