Re: Farmall H vs. M

Posted by Hugh MacKay on December 21, 2003 at 13:49:33 from (64.228.11.27):

In Reply to: Farmall H vs. M posted by Rod Jenkins on December 21, 2003 at 12:48:27:

Rod: The wheel base is the same at I believe 90". Axles on M are larger as well as longer, diameter is 2.5 for H and 2.75 for M. Standard axle length on M, SH and SM was 84" end to end on tractor, H was about 6" shorter. Weight is about 1200 lbs heavier for M. Figures I picked up were 5550 for H and 6770 for M, that must be with wheel weights and chloride added. Horse power, drawbar was all I could find on all of them; H 20. SH-30.6, M-24.8 and Super M-41.7 These figures were not listed as Nebraska test so I asume were IH figures. In those days IH were quite conservative.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall H vs. M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]