Farmall & IHC Tractors Discussion Board |
Re: 400- L.P back to Gas
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by hg on December 01, 2003 at 18:53:34 from (198.68.173.133):
In Reply to: 400- L.P back to Gas posted by Red 1 on December 01, 2003 at 17:19:06:
when I was a kid dad had a 450 gas converted it to LPG and nearly wore it out. Then he converted it back to gas. It never ran worth a darn. It was in the late 60's when he did it and parts were available but the side hoods were patched at the local sheet metal shop and he just looked at the center hole and the steering shaft as the dealer wanted $70 for a new one. That was a great running tractor on LP Gas but on Gasoline the second time around it never ran good.He changed the carbuetor governer and lots of things but no success on having it run like the first time on Gasoline. He finaly traded it off for a 806 and used the 560 in the place of the 450.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|