Need Your Advice (Specs)

Posted by Allan on November 27, 2003 at 04:48:08 from (148.63.132.164):

Hi Guys,

Here I go again; I need your help! :>)

Since this is Thanksgiving, I'm sure this business will maybe allow me a couple of hours to myself.

So, sometime today I want to check the tuning of my '51 H; because just running the loader hydraulics alone makes 'er grunt. I'm sure it has got to be out of time.

The specs page on this site says the timing should be at the first notch....okay, that sounds good.

But, the point gap setting is what is bothering me. The specs say for a Super H they are at .020" and a regular H should be set at .013".

Shouldn't that say for a distributor it should be set at .020" and a magneto equipped tractor, the setting is .013" ?

.013" seems awfully thin to me while adjusting a distributor equipped H.

Where do you guys set 'em on a distributor?

Thanks for your help,

Allan

Follow Ups:

• Re: Need Your Advice (Specs) rebuilder 04:19:49 11/28/03 (1)
  • Re: Re: Need Your Advice (Specs) Allan 04:46:01 11/28/03 (0)
• Re: Need Your Advice (Specs) Steve - IN 06:49:22 11/27/03 (0)
• Re: Need Your Advice (Specs) Red Dave 06:09:51 11/27/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Need Your Advice (Specs) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]