Re: Done! ...or maybe not...

Posted by FC on October 29, 2003 at 11:47:26 from (66.84.205.26):

In Reply to: Done! ...or maybe not... posted by David in UT on October 29, 2003 at 06:56:07:

One other thought....pilot bearing. This would cause the trans input to spin at engine speed. You might try starting with it in gear, and blocking clutch down securely and let it idle a while this way. Lock your brakes and block the wheels for safety. This might loosen up the bearing if it is stiff for some reason or a slight burr in the pilot bearing. It would not take much to spin the input shaft enough to be hard to get in gear. Good luck.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Done! ...or maybe not... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]