Re: Farmall 450 hyd leaks

Posted by Bill on September 24, 2003 at 11:55:22 from (199.149.165.236):

In Reply to: Farmall 450 hyd leaks posted by Adam R on September 23, 2003 at 08:57:16:

I have owned a 400 for 5 years and tolerated the same hyd leaks for that long. I am now into a major overhaul of the tactor and have torn apart all three valves. I intend to buy all o-rings and gaskets for each valve, plus the rings and gaskets for the emergency relief valve. Three other gaskets are needed: two on top of the hyd. tank and one on top of the valve-mounting post where the steering support sits. Also on the back of the post is a metal blow-out plug that I know is leaking and needs replaced. There are 18 additional o-rings that go between all valves and end plates. Laslty, larger o-rings are needed for all supply lines. Quite a list of stuff to buy.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 450 hyd leaks Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]