Re: starter question

Posted by riverrat on August 21, 2003 at 07:51:46 from (170.215.192.222):

In Reply to: starter question posted by clayton on August 20, 2003 at 18:52:14:

Might be the starter but I would replace the starter switch first. It's cheap enough and if it's not the problem you know you have a new one and can eliminate that question. Then take an ohm meter and check resistance from all cables from end to end. Should peg the needle just like if you were to hold the two prongs on the tester together. This would let you know where your problem lies. Also check the voltage at the starter terminal when you hit the starter button. Should be right around 6 volts. Much less than that (5.5 volts or so) isn't enough. Hope this helps to save you some $!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: starter question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]