Re: Swaping engines in my Farmall 706

Posted by K.B. on August 11, 2003 at 16:14:06 from (209.163.30.75):

In Reply to: Swaping engines in my Farmall 706 posted by Kelly Beevers on August 11, 2003 at 11:13:11:

The combine to tractor swap can be done, but from what I've been told, you'll be much better off finding a 706 with a 310 and a bad rear end. I have heard that the 715's 310 has a different crankshaft that does not allow for the 706 flywheel to bolt up. You have to have a flywheel made. There's a couple of other things on the 715 that won't work. I think the oil pan doesn't clear the tractor front end, and the oil filter doesn't clear the frame rail. Then there's the differences between a 706 with the 282 and a 706 with the 310. The frame rails and hood are different. If you bought a 756 parts tractor, you wouldn't get the correct sheetmetal, but you'd get about everything else that you need.

Follow Ups:

• Re: Re: Swaping engines in my Farmall 706 Kelly Beevers 16:59:28 08/11/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Swaping engines in my Farmall 706 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]