Re: Swaping engines in my Farmall 706

Posted by Aces on August 11, 2003 at 12:25:50 from (67.0.38.25):

In Reply to: Swaping engines in my Farmall 706 posted by Kelly Beevers on August 11, 2003 at 11:13:11:

Don't know it all but maybe give some idea. You would need side rails off late 706 that had the D310 or off 756 with D310, the plate that bolts to the back of the block for rear engine mount, I would think front timing cover along with front plate that bolted to the front of the block. I would think trany input shaft be the same has well as PTO drive shaft but part number will tell you that. Can remember if radiator pluming is the same. Some say the D310 starts hard in winter. I never found that to be the case unless they we overhauled getting the valves to seat hard job.with overhaul. But tough engine. Hope this helps some.

Follow Ups:

• Re: Re: Swaping engines in my Farmall 706 Kelly 13:41:25 08/11/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Swaping engines in my Farmall 706 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]