Wisconsin V-4 (a little OT)

Posted by Jon Blanc on July 09, 2003 at 04:19:25 from (205.188.209.140):

The VP4D Wisconsin on my New Holland 80 baler - I pull it with my "Good M" - got worked real hard baling wheat straw. The combine driver cut the wheat long and left the windrows too big, so the ole gal grunted pretty hard through it all, 92 degrees as well. I idled the motor for at least ten minutes before I shut it down and even then it "dieseled" for a while. The next day when I started the engine it ran but popped and cracked and took a long time to begin to smooth out. It never got good but I only had about five minutes to play with it. What's your best guess as to where to start trouble shoooting? Carbon in the cyclinders? Ignition break down? Plugs? Appreciate any suggestions. I only run the engine about three times a year and had never worked the engine that hard. Thanks Jon. Sorry for the long winded explaination.

Follow Ups:

• Re: Wisconsin V-4 (a little OT) Bus Driver 04:51:07 07/09/03 (1)
  • Re: Re: Wisconsin V-4 (a little OT) JOn Blanc 06:25:27 07/09/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Wisconsin V-4 (a little OT) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]