300 U --hydralic and firing questions

Posted by D Sellers on June 17, 2003 at 10:32:21 from (216.47.212.45):

Gentlemen, I have a question concerning a 300U.Ran the tractor for ~2 hrs. raking hay with a NH rolabar rake.Then the engine just quit. Would not fire at all.Next day began checking things out.Had plenty of spark from coil and from spark plug wires, however no fire on the removed plugs with engine turning over.Problem turned out to be fouled plugs,after cleaning plugs engine fired right up and ran smooth.Question is what would cause the fouling problem. These were new plugs with less than 10 hrs run time on them.Using Champion D-21 plugs. Are these the right plug? would old plug wires cause fouling problem?Do I need to get a hotter plug? Thanks

Follow Ups:

• Re: 300 U --hydralic and firing questions dick 11:30:13 06/17/03 (0)
• Re: 300 U --hydralic and firing questions Mike (MI) 10:55:32 06/17/03 (1)
  • Re: Re: 300 U --hydralic and firing questions Jim 20:47:58 06/17/03 (0)

Post A Followup Name: E-Mail: Subject: Re: 300 U --hydralic and firing questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]