Re: Farmall 400 water pump

Posted by Roger on May 26, 2003 at 19:10:49 from (209.100.170.105):

In Reply to: Farmall 400 water pump posted by Scott (TN) on May 26, 2003 at 18:25:23:

Scott, I don't know if I would put too much heat on that as there are ball bearings and sleeve bearings inside. I would keep trying with wrenches. I always hate it when someone uses a chisel to take something off instead of using the right wrench. Sounds like you need a trip to the salvage yard for some good used parts. My MD water pump was really in bad shape as the water pump center shaft had frozen to the bushing and the bushing was turning inside causing all kinds of damage. I found a water pump at the salvage yard and used parts from both to make a rebuilt one along with some new parts from Case IH. As for the packing, eventually all the packing disintegrates and appears like there is none in there. I can't remember how many packings I put in my water pump, but I thought it was like four of five. Roger

Follow Ups:

• Re: Re: Farmall 400 water pump Scott(TN) 06:20:23 05/27/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall 400 water pump Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]