Re: Re: Fast Hitch Cylinder Rebuild Question

Posted by Kilian on May 12, 2003 at 19:41:46 from (137.104.16.88):

In Reply to: Re: Fast Hitch Cylinder Rebuild Question posted by BobG in VA on May 12, 2003 at 10:11:08:

I decided to rebuild the cylinder because it would slowly drop down while in use. Mine is a 3-1/2" x 8" cylinder and the rebuild kit was easily available through Case/IH.

I've had it apart and back together once and need to reopen the thing to put in these back-up washers I was asking about (the cylinder was leaking out of one of the ends). Overall it was a pretty straight-forward procedure to unbolt and replace the parts with those from the kit.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Fast Hitch Cylinder Rebuild Question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]