Re: M jumps out of 5th gear

Posted by Bryce Andreasen (Magnum) on April 09, 2003 at 19:55:10 from (209.74.224.5):

In Reply to: M jumps out of 5th gear posted by Greg B on April 09, 2003 at 17:15:54:

I have a '41 H (similar transmissions) and it jumped out of fifth. I oppened it up and the pilot bearing was out, put new one in, and works like it came out of the factory. It also could be a wore 4th-5th sliding gear. Most of these tractors are about 60yrs old, so you kind of expect this kind of wear. Also, if it is the bearing, when going down hill in second, there may be a nock in trans. with bearing out, it drops the shaft down on the reverse.

Follow Ups:

• Re: Re: M jumps out of 5th gear GregB 16:49:57 04/10/03 (0)
• Re: Re: M jumps out of 5th gear justin 19:59:19 04/09/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: M jumps out of 5th gear Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]