Re: 300u TA ?

Posted by dick on April 04, 2003 at 08:56:10 from (65.59.16.192):

In Reply to: 300u TA ? posted by Jim R. on April 03, 2003 at 20:17:34:

I expect both Hugh and Ernie Bob are correct that you will need to rebuild your TA to have it work as it's supposed to, but before jumping into that, I'd suggest trying to adjust the clutches to specification first. I've seen a number of these tractors at auctions, etc., and almost all of them have had their clutches adjusted incorrectly. Given this, it's no wonder people have so much problems with TAs.

If you haven't purchased it already, the Operator's Manual, available from Binder Books, tells you how to do the adjustment properly, along with a myriad of other things which are non-obvious to the newby tractor owner. Good luck, and welcome to the wonderful world of antique IH tractors.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 300u TA ? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]