Re: Farmall H and a snowplow???

Posted by Brian Saylor on February 18, 2003 at 05:50:50 from (209.187.252.18):

In Reply to: Farmall H and a snowplow??? posted by Tommy Boy in PA on February 17, 2003 at 18:15:54:

I made a custom mount for my 48 H. It mounts to the frame rails along the engine and has two heavy bars going down. There are support beams that run back to the belly mount hitch point. A horizontal 2x4 U channel has clevis mounts that match to a Meyers 7' truck plow (painted red looks good). A 3x8 cylinder lifts the plow at the center of the mount using the Farmall hydraulics. I use it to plow my driveway and others around me. I show up my neighbor with a 8N with a back blade all the time. We race to see who finishes first. I always win (plowing in 3rd or 4th gear).

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall H and a snowplow??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]