Re: Need help w/ A magneto

Posted by Steven@nd another tech article... on February 11, 2003 at 19:26:03 from (12.40.186.45):

In Reply to: Need help w/ A magneto posted by Andy K. on February 11, 2003 at 16:52:51:

Here we go:



This is what the magneto looks like on the tractor. (orientation)



Pull the distributor cap off and this is what you see (the rotor).



Pull the rotor off and you see this.



Then you need to loosen 3 screws to pull the cover off. Arrows in picture.



Then you will pull that cover off and see this.



Here is the points. The gap between them when they are open like this needs to be .013"

Hope this helps out, you're lucky I had a mag sitting in my apartment waiting to be shipped out...

Follow Ups:

• Re: Re: Need help w/ A magneto mwmjr 11:29:56 02/13/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Need help w/ A magneto Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]