Re: RPM PTO speed on H

Posted by STEVEN H on November 11, 2002 at 06:00:45 from (209.103.199.83):

In Reply to: RPM PTO speed on H posted by Kelly C on November 11, 2002 at 04:59:14:

The pto is ment for 540 rpm and runs from the motor, but i have never knowen anybody that runs that on the older tractor that dont have a tack. new tractors like the jd 2755 have tacks that have your speed for the gear and a bar for where the pto speed is. sorry guys about the mention of one of those green things but i had to rent one this spring to finis cuting hay, as the h was dead no resting that is it resting. just a note my baler missed less bales when i ran at the pto mark on the jd, i have one older then your two i think an m-f 12 nothrow misses bales all the time.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: RPM PTO speed on H Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]