Re: 300U Hydra-Touch Controls Upside Down???

Posted by Red Rider on September 21, 2002 at 20:22:58 from (65.239.44.4):

In Reply to: 300U Hydra-Touch Controls Upside Down??? posted by Bob Kirk on September 21, 2002 at 19:18:14:

First of all you just flip them over, the hydraulic inlet and outlet would not line up. You can run hydraulic lines off either the top or the bottom. As far as the levers go, they are on a splined shaft and can be rotated to any position that you like. Did your hydratouch system just quit or get weaK. The first think I would check is the hydraulic filter screen under the seat inside the reservoir.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 300U Hydra-Touch Controls Upside Down??? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]