Re: Re: stuck engine

Posted by Dave_D on June 26, 2002 at 15:38:35 from (206.176.131.18):

In Reply to: Re: stuck engine posted by Farmer Gene (WI) on June 25, 2002 at 14:46:16:

If you can take the pan off, you can look up the cylinder. You will probably see rust below the piston. The chances of having it move over all that junk is slim. What I had to do is disconnect the connecting rod and push (beet with mallet and wood stick) the piston out the top. You might have to ream the ridge first. After the piston is out, then hone out all the rust and reinstall the piston.

Good Luck.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: stuck engine Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]