Re: Re: Couple w30 questions

Posted by Dave H on April 30, 2002 at 09:52:28 from (12.75.132.135):

In Reply to: Re: Couple w30 questions posted by Will@ont.ca on April 30, 2002 at 02:42:59:

I have not worked on a w 30 , but on a f-20 you can remove the flywheel and crank from the block. You remove the clutch assembly, then looking through the large holes in the flywheel , you can see the bolts for the bearing and clutch howsing. Remove those, and your rods and pistons and pound out the crank. flywheel, crank and clutch housing will all come.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Couple w30 questions Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]