|
Farmall & IHC Tractors Discussion Board |
Re: Farmall M Transmission leak caused by drive gear gouging hole in case
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tim Malin on April 19, 2002 at 06:15:00 from (216.56.32.131):
In Reply to: Farmall M Transmission leak caused by drive gear gouging hole in case posted by Dennis on April 18, 2002 at 14:44:20:
We have a 45 M that rusted a little hole(smaller than a pencil) in the bottom of the transmission case. My dad is an expirenced welder of 25 years and knew a few tricks to fix it. The second he touched it with the stick and made an arc the walls were so thin they disappeared, leaving a hole bigger than a silver dollar. After some more tinkering, he welded a patch to it. Somebody should be able to do it for you, but if it is really tore up in might be cheaper and safer to find a salvage rear end to part out. Good luck.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Mud Daubers and the Old John Deere - by Jon Zehnder. I have a 1941, John Deere Model A tractor I have owned for about a year and a half. This is my first (in case my wife reads this, "FIRST") tractor and it has been a learning experience. After considerable advise and assistance from local tractor nuts and the forums of Yesterday�s Tractors, I had finally got it running pretty well. I have tuned it up, overhauled the carburetor, installed a borrowed, rebuilt magneto, installed a new Power-Trol, patched the radiator, installed new front wheels a
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|