Re: Stepped head pistons in a early M?

Posted by georgeky on May 31, 2007 at 21:48:44 from (64.12.117.8):

In Reply to: Stepped head pistons in a early M? posted by Patrick Martin on May 31, 2007 at 19:19:50:

You can take the M from 248 CI to 264 CI with a rebore kit. 264 pistons are 4 inches across. Straight M is 3 and 7/8. You can go with the 264 kit and still use your old cam and carb. Measure your pistons to see if they are stock. Most old Ms have already had overbore pistons put in them. I have two, one with M&W pistons and one with IH Firecraters in it. Both have stock cams and carbs. As Jim said the 400 sleeves are as big as you can go.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]