Re: 1086 hi range

Posted by the tractor vet on May 19, 2007 at 07:15:20 from (75.19.123.226):

In Reply to: 1086 hi range posted by mulcher on May 18, 2007 at 21:15:29:

Ah yes , it could be a broken roller a bad detent on the shifter cam or a woren shifter fork . This work has to be done thru the cab floor and i know you do not have the range cover removal tool but with a spare set of hands ya can do it . You also must remove the side cover on the left side of the rearend housing it is the plate with the clipped corneras that is where the rev. shift fork is and it will fall and make it imposible to put back on . Also ya must block UP the park locas it is HEAVY SPRING LOADED and will remove fingers . USe a 1/2 inch bolt head under the parkloc to hold it up . BEST TO GET A BOOK IF YA HAVE NEVER DONE THIS BEFORE>

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]